Vastex Big Red4D Series V30S DTG/WB/Plastisol Industrial Infrared Dryers
- Two temperature controls provide a +/-1 degree F accuracy
- Digital PID with Fuzzy logic
- At the exit, a unique cooling bed accelerates clothing cooling
- Cool Down Mode makes it easy to shut down
- 4" to 7" (10.2 - 17.7 cm) Height adjustment for the belt-to-heater
- A must-have digital belt speed voltmeter
- Make-up and Negative Exhaust Air quickly eliminate moisture and odours
- Filtered air intake ensures pure curing air with no recirculated fumes
- Conveyor Belt Tracking System "X-Series" with HD drive
- Heat chambers and belt extensions included
- Side heaters provide uniform curing throughout the whole width of the heating source
- The exhaust system focused on removing fumes/moisture from the chamber
- Excellent airflow to keep the dryer's skin cool
- Dual-zone heat control, four strong infrared elements, and makeup air make it ideal for inkjet curing
- Filtered exhaust with fault detection
- Standard side heaters offer equal heat over the whole width of the heating elements
- 54" wide dryer with side heaters can cure 3 rows of clothes (12" picture with 16" centres)
- 1 year electronic warranty and 15 years heater warranty
Specification
| BR4D-V30S | BR4D-V54S |
Standard Wattage | 14200w | 25600w |
Belt Width x Length | 30” x 83⁄4’ (76.2 x 267cm) | 54” x 83⁄4’ (137.2 x 267cm) |
Chamber (tunnel) Length | 4.5’(137.2cm) | 4.5’(137.2cm) |
CURE TIMES
| 1 rows | 2 rows | 3 rows |
Plastisol @ 25 secs. | 475+/hr | 1,425+/hr
| 950+/hr
|
Water Based/Discharge @ 50 secs. | 216+/hr | 648+/hr | 432+/hr |
Digital White Ink @ 3 min. | 60/hr | 180/hr | 120/hr |
Digital White Ink @ 8 min. | 24/hr | 60/hr | 48/hr |
| BR4D-V30S | BR4D-V54S |
Heater Warranty | 15 Year | 15 Year |
Defect Warranty | 3 Year | 3 Year |
Shirts / Hr - (Plastisol) (Water based/Discharge) | 475+ @ 25 secs. 216+ @ 50 secs. | 950+ @ 25 secs. 432+ @ 50 secs. |
Shirts/hr - DTG/digital | 72@2.5min, 60@3 min. 30 @ 6 min. | 144 @ 2.5 min, 120 @ 3 min. 60 @ 6 min. |
Time in Tunnel Range (mm:ss) | 00:12 - 01:45 | 00:12 - 01:45 |
Belt Speed | 1.8 - 23.6 FPM (0.6 - 7.2 MPM) | 1.8 - 23.6 FPM (0.6 - 7.2 MPM) |
Exhaust (Free Air) | 500 CFM (14.2 CMM) | 700 CFM (19.8 CMM) |
Exhaust Stack Diameter | 6” (15.24 cm) | 8” (20.32 cm) |
Overall Length | 105” (267 cm) | 105” (267 cm) |
Overall Width | 47.3” (120.2 cm) | 71.4” (181.4 cm) |
Overall Height | 51.6” (131.1 cm) | 51.6” (131.1 cm) |
Belt Width | 30" (76 cm) | 54" (137 cm) |
Chamber Length | 54” (137cm) | 54” (137 cm) |
Chamber Infeed Width | 34.5" (88 cm) | 58.5" (149 cm) |
Chamber Infeed Height (adjustable) | 2" - 7" (5 - 17.7 cm) | 2" - 7" (5 - 17.7 cm) |
Heat Range (@ Heater) | 0-900F° (0-482C°) @ 240V 0-1150F° (621C°) - booster | 0-900F° (0-482C°) @ 240V 0-1150F° (621C°) - booster |
Heater Size & Standard Wattage | 4 @ 12" x 24" (30 x 61 cm) Zone 1 @ 3,600 Watts Zone 2 @ 7,800 WattsSide Heaters 2 @ 3” x 47” (7.6 x 120 cm) 1,400 watts per side 14,200 Watts Total | 4 @ 12" x 48" (30 x 122 cm) Zone 1 @ 7,200 Watts Zone 2 @ 15,600, WattsSide Heaters 2 @ 3” x 47” (7.6 x 120 cm) 1,400 watts per side 25,600 Watts Total |
Cost / hour to operate based on 10 cents / kwh | $1.42 @ 240V | $2.56 @ 240V |
Electrical Specs Chamber | 240V / 63A / 1 Ph. / 3 wire 50/60HZ | 240V / 70A / 3 Ph. / 4 wire 50/60HZ |
Electrical Connection | All amps shown are FLA (Full Load Amps), not recommended line size! Dryers on this page must be hard-wired to the power terminal provided. A licensed electrician must be consulted and should refer to articles, 210.20(a), 215.3 and 310 of the NEC code. | |
Optional Chamber Power Also available in 380 / 440 / 480 | 240V / 44A / 3 Ph. / 4 wire 50/60HZ 380V/ 22A / 3 Ph. / 5 wire / 50/60HZ | 240V / 110A / 1 Ph. / 3 wire 50/60HZ 380V/ 49A / 3 Ph. / 5 wire / 50/60HZ |
Shipping Weight | 1,018 lbs (462 kg) | 1,438 lbs (653 kg) |
Shipping Dimensions | 72" x 61" x 63" (183 x 155 x 160 cm) | 92" x 65" x 63" (234 x 161 x 160 cm) |
